Finding the right dump bed scissor lift kit means matching load capacity, reliability, and ease of installation to your trailer or truck setup. This guide highlights five strong choices for American buyers: from mid-range 8,000–17,600 lb units to heavier 22,000 lb systems. Best for contractors, farmers, and transport professionals who need dependable bed elevation and controlled dumping. Below, compare capacity, power, and key notes to help you pick the best fit for your work. A quick buyer’s table is provided for easy reference.
| Product | Capacity | Power | Best For |
|---|---|---|---|
| VEVOR Hydraulic Dump Lift Kit (17,600 lb) | 8 t | 12V | Medium- to heavy-duty hauling, versatile trailers |
| Johnson PH516 Hydraulic Scissor Hoist (16,000 lb) | 8 t | 12V | All-around dump trailers, multiple bed lengths |
| VEVOR Hydraulic Dump Lift Kit (22,000 lb) | 10 t | 12V | Heavier loads, farm and construction payloads |
| Dexter PH520 Hydraulic Scissor Hoist (20,000 lb) | 10 t | 12V | Large dump beds, 12–16 ft trailers |
| 8 Ton PF-516-HOC (16,000 lb) | 8 t | 12V | Dump bed trailers and trucks with longer beds |
VEVOR Hydraulic Dump Lift Kit, 17,600 lb
The 8 t/17,600 lb capacity makes this kit suitable for 10–14 ft dump trailers and trucks. It uses a double-acting 8 QT/7.6 L hydraulic pump to enable controlled lifting and lowering, powered by a 12V vehicle source. A safety arm adds stability when the bed is unloaded. Best for: mid-to-heavy workloads where smooth, remote operation saves time. Caution: ensure compatible bed length and mounting hardware for your trailer to prevent misalignment.
Johnson PH516 Hydraulic Scissor Hoist Kit, 8 Ton
Rated for 8 tons (16,000 lb) on 10–14 ft dump beds, this standard kit includes the PH516 hoist, KTI pump, hoses, fittings, safety arm, and bed hinges. It offers a full lift system ready for installation, with a 15 ft wired remote enabling precise control. Best for: users needing a complete, straightforward installation with dependable hydraulic power. Limitation: specific bed lengths and mounting compatibility should be verified before purchase.
3 Ton PF-310-K Dump Trailer Kit
This 3-ton (6,000 lb) kit is designed for 8–10 ft dump body trailers and trucks, including PF-310 with cylinder, mounting brackets, hinges, hoses, and a 12VDC pump. It features power up/power down operation via a 15 ft control. Best for: smaller dump beds where a compact, cost-conscious system is desired. Limitation: lower capacity may not suit heavier loads or larger trailers.
PF-310-HOC Hoist-Only Kit
An hoist-only option rated for 6,000 lb capacity, designed for 8–10 ft dump bed trailers. It includes power hoist PF-310 with controls and wiring. Best for: adding a robust hoist to existing bed frames. Caution: kit is hoist-only and requires additional pump and hose components for full operation.
VEVOR Hydraulic Dump Lift Kit, 22,000 lb
This heavier option fits 12–16 ft dump trailers and trucks, rated up to 10 t (22,000 lb) total load. It uses a 10 QT/9.5 L double-acting pump for faster lifting and remote control from a 12V power source. Best for: demanding workloads that require higher bed and cargo capacity, with added stability via a mechanical support arm. Limitation: larger size may require more mounting space and stronger vehicle frame support.
Dexter PH520 Hydraulic Hoist – 10 Ton
10-ton capacity for 12–16 ft dump beds, with a 12V KTI pump and a 15-foot remote for safe operation. The standard kit includes the hoist frame, cylinder, hoses, fittings, and mounting hardware. Best for: large dump bed installations requiring substantial lift capability. Caution: ensure compatibility with existing bed hinges and frame spacing to avoid installation conflicts.
8 Ton PF-516-HOC Hoist-Only Kit
An 8 ton (16,000 lb) capacity hoist for 10–14 ft dump beds, with the PF-516 hoist, 12V pump option, 15-ft remote, and standard hoses and hinges. Best for: upgrading or replacing a hoist on medium-to-large dump bed trailers. Limitation: hoist-only setup may require additional components for full bed control on some configurations.
Buying Guide
Key considerations help you choose between these dump bed scissor lifts. Capacity and bed length are primary; ensure the kit’s rated load meets or exceeds your typical payload. Power source compatibility is essential; all listed kits use 12V systems, but verify vehicle compatibility and wiring length. Installation hardware and mounting geometry vary; check bed construction, frame clearance, and hinge alignment to prevent interference. Safety features such as a mechanical support arm or safety arm reduce risk during unloading. If you need precise control from a distance, prefer kits with wired remotes and sufficient cable length. For larger, frequent dumps, higher tonnage models offer faster operation and better stability.
Common questions
- What bed length is compatible with a given kit? Look for 8–14 ft or 12–16 ft compatibility based on the model. Choose accordingly to your trailer’s length.
- Is a hoist-only kit sufficient? Hoist-only kits are best when you already have the pump and hoses or plan to reuse existing components.
- Do I need a larger capacity system if I haul heavy loads? Yes. For frequent heavy payloads, select a 16,000–22,000 lb class to prevent overloading the system.
- What safety features are important? A safety arm, gravity-down protection, and a remote with adequate range improve operation safety and control.
- Can I install these myself? Most are designed for standard bed frames, but verify mounting brackets, bed hinges, and frame compatibility before purchase.
- Will these work with all dump trailers? Verify trailer length, bed height, and mounting hole spacing to ensure fitment with your existing trailer or truck.
Quick comparison at a glance
- Best for mid-range capacity: VEVOR 17,600 lb kit — balanced lift and remote control.
- Better for complete install: Johnson PH516 — full kit with remote, ready-to-install components.
- Best for heavy-duty farm/trade work: VEVOR 22,000 lb kit — higher load, robust build.
- Best for large dump beds: Dexter PH520 — contributes to large 12–16 ft bed setups.
- Choose this if you need added hoist capability: PF-516-HOC hoist-only option.
Frequently asked questions
- What is the typical installation time? Installation time varies by bed type and mounting, but standard kits usually require several hours to a day for wiring and mounting.
- Do these include control remotes? Most standard kits include a 15-foot wired remote for precise control.
- Are warranties included? Warranty details are not specified here; verify with the seller before purchase.
- What maintenance is required? Regular inspection of hoses, fittings, and hydraulic fluid levels helps ensure reliable operation.
Add a Comment